Press and hold the "P" key for about 6 seconds. When the red and green lights are on at the same time, set the door opening force first, press the "" key to increase, and press the "-" key to decrease The number of slow flashes of the green light is the current strength level. Press "P" key to confirm after selection and keep. When the power regulation turns off automatically (when the traffic light is always on), press "" to increase "-" to decrease. The red light indicates that the number of slow flashes is the current value, press "P" to confirm, and press and hold to exit the process. The red light goes on.

4、濟南車庫門手動控制器的對碼與取消

4. Code checking and cancellation of Jinan garage door manual controller

(1)車庫門取消代碼

(1) Garage door cancellation code

長按對碼鍵約三秒，直到顯示燈熄滅，實現對碼取消過程。

Press and hold the code matching key for about three seconds until the display light goes out to realize the code cancellation process.

(2)車庫門配套

(2) Garage door matching

按下控制器的對碼鍵，對碼顯示燈長亮，再按手動無線遙控器上需要配對的功能鍵（A或B），對碼顯示燈控制器將從長亮變?yōu)殚W爍。

Press the code matching key of the controller, the code matching display light will be on for a long time, and then press the function key (a or b) to be paired on the manual wireless remote control, and the code matching display light controller will change from long light to flashing.

車庫門行程的調整的相關內容就是以上講解了，您可以來關注我們的網站99feipin.cn，選購您所需要的門，當然有問題可以隨時聯系我們?yōu)槟獯穑?/div>